Block Making Machine

Products
Product Video
  Blocks stacking system
  Blocks stacked in stock yard
  Block making process - block
  Fully auotmized block making process line
  Block making machine-Automatic operation
  Block making machine-Running-PART 1
QT4-15Block Forming Machine
 
1. Reliability. The machine frame is made of super- strength steel and by special welding technology, the imported elements are applied widely, so that the stability and reliability of the machine in long term running are insured.
2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, fault diagnosis and parameters setting , ensure the best operation effect of the machine.
3. Unique design. The special loading and supply unit, the multi-line whipping forks are fixed at inside of material feed box. The whipping forks works and feed the material to mold box forcedly during the material feed box moves to up of mold box, the feed will smoothly and equalization, than for the product, the intensity is insured and the weight is equal.
4. Design with super strong vibrating activated force, The computer controls the pressure and flowing rate of hydraulic system; vertical synchro-vibration; frequency conversion; brake, final the product reaches the high density and high strength within short time.
5. Multi use; strong performance; the many kind of products with difference form and size can be made when use the difference mold , such as wall block, honeycomb type block, road block and slope block.
Main Technical Performance and Parameters :
Forming cycle(s) Pallet pattern(mm) Installed capacity Weight(t) Forming machine dimension and size.(mm)
12-18 900×540×40 26.8 6.8 6120×2240×2750
 
Theoretical Output Table:
Product specification(mm) block number each pallet Block/hr Block/8hr
Block 390×190×190 4 960 7680
multiholed brick 240×115×90 14 3360 26880
Standard brick 240×115×53 28 6720 53760
and Ground brick 200×100×60 16 2880 23040
» Top
QT6—15A Block Forming Machine
 
1.Force feed unit: The whipping fork works rapidly during the feed box moves to up of mold box, finally the equalization of material feed and the consistency of the products intensity are insured. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, fault diagnosis and parameters setting, ensure the best operation effect of the machine.
3. Enlarge the available area of the work table: The appliance of the advanced vibration technology causes the larger work table, it makes that the productivity is increased greatly.
4. Particular vibration type: The computer controls the pressure and flowing rate of hydraulic system; vertical synchro-vibration; frequency conversion; brake. Transforming the over quantity of hydraulic oil to a vibrating activated force, thereby basically eliminating the energy waste.
5. Reasonable distributing of vibration: mold box fixes at the vibrating table via the cylinder of drawing mold, there is a special vibrator fitted on the pressure head. The combine vibration of the work table and mold increases the vibrating velocity and causes the concrete liquefy and exhaust quickly, final the product reaches the high density and high strength.

» Top
The Sketch Map For Simple Block Making Machine Production Line
 
» Top
The Sketch Map For Semi-Automatic Block Production Line
 
» Top